The mud agitator is a continuous and reliable drilling mud solids control system for maintaining the uniformity of the drilling fluid and suspending the solid particles. Mud agitator is mainly used for agitating and mixing of drilling fluids to prevent the solid particles of drilling fluid from being deposited in its tank circulation system, so that the performance of the circulating drilling fluid is stable and evenly mixed. Equipment structure: slurry mixer, mainly composed of explosion-proof motor, reducer, base and pulsator components, motor and reducer, reducer and wave wheel shaft are connected through rigid coupling. The pulsator is welded from four blades.
DC, mud agitator supplier, will talk about the working principle of mud agitator next: The mud agitator is suitable for the agitation of petroleum drilling fluid. The mud agitators use cycloid speed reducers below 5.5kW. The drilling fluid mud agitators above 7.5kW adopt a worm gear type deceleration transmission, and the pulsator can make the agitating liquid to generate vortex motion, thereby enhancing the stirring effect. The pallets sandwiched between the blades can also prevent solid particles of the slurry from depositing around the lower blades after shutting down. This reduces the resistance of the deposits to the blades during start-up, thus avoiding starting overload and burning the motor.