江苏快3

+86 315 8153 977
Solid control system. Mud recycling system for HDD. Mud cleaning system.
Home  > News

Rilling Fluid High Speed Decanter Centrifuge

Nov。 27, 2018

China Drilling Mud Centrifuge Decanter is the previous phase gear in drilling mud system for solids management and sand cleaning. Decanter centrifuge could get rid of the particles with dimension 2-7 microns employing the principle of rotational activity, it's an perfect option for separating particles from drilling mud.

Always there's a twist pump or submersible pump to nourish the sand to Decanter centrifuge。 Following the electrons being fed to the centrifuge drum, then under the role of centrifugal force, strong phase particles have been pushed into the inner walls of the drum, then into the good release export of the little end of the drum and excreted。 While the fluids is excreted out of the overflow gap of the huge end。

This cycle would be to get the aim of continuous separation. High rate decanting centrifuge are better for separation of solids. Decanter centrifuge is your last processing units at the arrangement of solids control equipment. It might be utilized to procedure unweighted and weighted, water-based and naturally-occurring fluids (muds). In oilfield, centre rate centrifuge can be used to recycle the barite and bentonite in solids management system, higher rate Drilling Fluid Decanter Centrifuges could divide the solids from drilling mud after the desilter unit.

Meanwhile, the higher speed centrifuge centrifuge is obviously employed in drilling waste management to recoup the precious drilling fluids.

Rilling Fluid High Speed Decanter Centrifuge

Rilling Fluid High Speed Decanter Centrifuge

Follow Us

Copyright © TangShan Dachuan Mechanical Equipment Co。, Ltd。 All Rights Reserved

吉林快3 广西快3 北京赛车PK10计划 北京快3 贵州快3 甘肃快3 江苏快3 极速快三 江苏快3 河南快3